IR spectroscopic analysis of the structure of melamine-formaldehyde resins modified with n-butanol
Keywords:
ФФС, КФС, РФО, ИК, модификация, н-бутанолом, спектроскопия, формальдегид, меламин.Abstract
Globally, the industrial sector is becoming increasingly dependent on imports of phthalates and melamine-formaldehyde resins. This complicates the development of safe protective coatings and places a greater burden on the environment. In this context, it is particularly important to develop a modified polymeric tar—one that is technologically, economically, and environmentally sound—capable of forming coatings with high thermal resistance and operational reliability. The use of n-butanol as a modifier, in an optimal molar ratio, is essential for establishing local production; it facilitates the creation of a film-forming system for heat-resistant paints and coatings that offer superior adhesion and elasticity.
Currently, melamine-formaldehyde resins are not subjected to thermal treatment; instead, their adhesive and elastic properties are modified to enable their use in various composite formulations. By employing modifiers—such as n-butanol, amino acids, and phthalic anhydride—within alkaline solutions, optimal synthesis conditions (in terms of molar ratios, solubility, and catalyst concentration) can be achieved. This allows for the modification of the resins and their compounds, facilitating a comprehensive study of the materials' structural, rheological, and performance characteristics.
Furthermore, inorganic substances and various alloy-based additives are utilized as modifiers for paint and coating materials, including those derived from oilseed cakes, oils, and other industrial by-products. The third point of Uzbekistan’s development strategy—which calls for "securing a multi-million-scale economy" and increasing investment in the sector by a factor of 1.4 compared to the same period of the previous year—highlights specific objectives. In this context, new modified melamine-formaldehyde resins and thermal barriers have been developed to enhance the operational reliability of materials and to optimize both their synthesis conditions and the modifiers used. For a given set of parameters, specific values can be adjusted by incorporating the parameters provided in the table.
References
. Sunthakar S.V., Gilman H., Silicon-Containing Azo Dyes // J. Org.
Chem., 2013, №15, pp. 1200-1210.
. Пэйн Г.Ф. Технология органических покрытий. – Л., 1969. – С.
–385.
. Қ.М.Юсупов, Ф.И.Эркабаев Синтез меламин-формальдегидной
смолы, модифицированной с N-бутанолом // Электронный
научный журнал «Universum: Химия и биология». – 2022. –
№10(103). – С. 38–41. (02.00.00., №2).
. М.А.Нумонов, Қ.М.Юсупов Research on the synthesis of modified
melamine–formaldehyde resin with n-butanol // Электронный
научный журнал «Universum: Химия и биология». – 2021. –
№12(90). – С. 38–41. (02.00.00., №2).Bergaya F., Theng B.K.G.,
Lagaly G. Handbook of Clay Science. Elsevier, 2006. 1224 p.
. Wieber M., Schmidt M., Silicium- und germaniumhaltige 1,3-
Benzodioxane // J. Organomet. Chem., 2017, 1 (1), pp. 93-94.
. Chunli Zhu, Yanze Wei, Jing Zhang, Pengfei Geng, Zaijun Lu,
Preparation of polysiloxane oligomers bearing benzoxazine side
groups and tunable properties of their thermosets // J. App.l. Polym.
Sci., 2014, 131, рр. 409-460.
. Эркабаев Ф.И. , Юсупов К.М. Меламин-формальдегид
смоласини н-бутанол билан модификация қилиш // ЎзР ФА
Навоий бўлими ташкил этилганлигининг 5 йиллигига
бағишланган “Фан, таълим ва ишлаб чиқариш интеграцияси-
ривожланиш ва тараққиёт гарови” халқаро илмий-амалий
конференция. 2022 йил 9-10 июнь, Навоий ш. 381-382-бетлар.
. Greber G., Polykondensationsreaktionen bifunktioneller
siliciumorganischer Verbindungen //J. Prakt. Chem., 1971, 313 (3),
pp. 461-483.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2026 Kudratillo Yusupov

This work is licensed under a Creative Commons Attribution 4.0 International License.